Rubber Bumper Strips 1972

feeds@yuku.com (gransport455) — Mon, 07 Dec 2009 21:36:18 GMT

I have lost the name and phone number for the company that makes the reproduction rubber bumper strips and the taillight surrounds for the 72. Anyone have it? Thanks, Terry

Wanted, 68-69 skylark rocker moldings

feeds@yuku.com (extended play) — Sun, 06 Dec 2009 23:12:40 GMT

Looking for stainless rocker moldings, and hdwr/clips. 68-69 skylark 2 dr.
give me a yell. GSWAGON@ ZOOMTOWN.COM
Thanks Darrell

Floor Console Question

feeds@yuku.com (blueaggie) — Sun, 06 Dec 2009 19:31:23 GMT

Hi guys, Happy Holidays to everyone! I have a question about the floor
console for my four speed '65 Skylark GS. After a friend helped me
take it out of the car to repaint, we discovered that the three tabs
underneath the console that hold the upper shift boot had been broken
off. Does anyone have any ideas how I could possibly fix that or how
to work around not having them and still be able to use the new upper
shift boot I'm purchasing? Thanks!

Rubber bumper strips 1972

feeds@yuku.com (gransport455) — Fri, 04 Dec 2009 11:01:23 GMT

I have lost the name and phone number for the company that makes the reproduction rubber bumper strips and the taillight surrounds for the 72. Anyone have it? Thanks, Terry

Sept/Oct 2009 issue mailed yet?

feeds@yuku.com (rgs455) — Thu, 03 Dec 2009 23:32:55 GMT

Haven't seen mine and was checking to see if it may be lost.

New product for Buick V-6, 350, 400-455. These Valve Cover Clamps stop the oil leaks !

feeds@yuku.com (ALMACK) — Tue, 01 Dec 2009 10:13:29 GMT

New product for Buick V-6, 350, 400-455.

These patented one-piece steel clamps eliminate valve cover flange distortion and helps provide an instant seal without the need for messy gasket sealer.

Available in powdercoated gloss black , powdercoated chrome, and gray primer for those wishing to paint with their choice of color.

Made in the USA and all of our clamps come with a lifetime warranty against defects in workmanship and material.

More info:

power steering bracket 1967 gs california

feeds@yuku.com (caligs67) — Sat, 28 Nov 2009 18:07:58 GMT

I am looking for the bracket that attaches to the actual pump. I have the aluminum bracket that goes to the block> Any ideas?

mounting bracket for powewr steering pump

feeds@yuku.com (caligs67) — Sat, 28 Nov 2009 14:49:05 GMT

Hey, Im putting power steering on my1967 buick gs california. i have all nthe parts except the bracket that mounts the pump to the aluminum bracket that is attached to the block. Ive ordered it twice from junkyards and both times i got the bracket that i already have. If sombody has pics they could post of their engine and power steering set up, i would appreciate it. or any other info on where to get these brackets. thank you./ Dieter stranz

DIY Replacement Cabin Air Filter

feeds@yuku.com (spongebobbie) — Sat, 28 Nov 2009 02:47:58 GMT

Hi Guys, I came across this video on how to change cabin air filter The instructions are general so I would like to ask if it also applies to newer versions of Buick vehicles. Thanks

Front End Humming Noise on 2004 Buick Rainier

feeds@yuku.com (spongebobbie) — Sat, 28 Nov 2009 02:16:13 GMT

Hi guys, I just came back from a 4 hour road trip to New Mexico and I have started to notice that there is humming noise in the front end. When I let off the gas and slow down, I can hear it more clearly. The noise isn't that so load but it is noticeable. I seem to feel it in the steering wheel as well as a soft vibration when slowing down. Any help is appreciated.

______________________________________________

1968 Buick Starter 1108354 Date 8 E 28 which is May 28 1968

feeds@yuku.com (302Camaro) — Mon, 23 Nov 2009 15:52:49 GMT

Hello,

I have a good starter for sale that is correct for a 400 and 430 Buick engine. Of what I understand, also correct for GS models.

I will sell this for $100.

US Postal Money Order or cash in hand sale only.

I will package it and ship it. I will drop off at UPS, USPS or Fed Ex. Buyer must pay for shipping costs, but I will safely package it up at no additional cost.

Call Wayne 781 391 2885
no calls before 9am or 9pm please
...

Old Buick Cruise Control

feeds@yuku.com (gcbrown01) — Sun, 22 Nov 2009 23:44:11 GMT

I found a box with a complete cruise control system for a Buick. Do not know what year but the 9 page instruction booklet has a part number 25519867. Does someone know if this is a valid number? The system has some parts in the original GM plastic bags.

FS: good supercharged 3800 engine from 99 GTP...

feeds@yuku.com (tsiconquest88) — Wed, 18 Nov 2009 15:05:36 GMT

127k miles and charger (if wanted) rebuilt at 87k. Engine is great!!! in the car right now just has a blown trans and im parting the car out. Its a 99 GTP. Let me know if you want the engine and or parts from the car. Thanks pm or email tsiconquest88@hotmail.com i am a verified paypal member also.

Time To Let Go......... (Engines/Project Car For Sale)

feeds@yuku.com (Nutz4Buix) — Tue, 17 Nov 2009 01:02:23 GMT

I am a new member to this site, however I am not new to Buicks. I wanted a GN before I even knew what it was. 8 years old, there it was in the Car Craft, in a centerfold fresh off a road test. When I finally got my license and started driving, I found that the TRs were a bit pricey for my budget, so I eventually settled for building a GS/GSX clone.

However, the project eventually fell through. The car was lost to illegitimate storage fees (the place was closed for months at a time...

1966 Riviera Rear-End Question

feeds@yuku.com (wagonboy) — Thu, 12 Nov 2009 13:38:35 GMT

Will a 1966 Riviera GS rear-end bolt into a 1965 Riviera without any problems?

Turbo 400 question

feeds@yuku.com (bumble) — Tue, 10 Nov 2009 13:30:47 GMT

Hi Everyone,

I'm replacing my trans cooling lines for my 455 Skylark with a Turbo 400 and I'm having trouble hooking one of the lines to the trans. I may have slightly cross-threaded it during one attempt and damaged the thread on the brass female fitting on the trans that the cooling line screws into. Even though the threads don't look messed up, I've been having a hard time hooking this line up. I can thread it easily into the other brass fitting, so I know the...

Starting Issue on 70 GS455

feeds@yuku.com (jwhough) — Sun, 08 Nov 2009 14:49:03 GMT

Can anyone recommend where I can purchase a top notch starter/solenoid? I have a no-start condition on hot days....thanks in advance

GS hood wanted (refuse to settle for fiberglass)

feeds@yuku.com (skylarker) — Tue, 27 Oct 2009 02:14:47 GMT

im looking for a GS hood please help i dont want a fiberglass hood. 954-657-1478 call anytime

Buick GS Club of America/GS Nationals

wanted carter 9800 thermoquad strip kit....

1971 GS+